Analog Discovery Studio: A portable circuits laboratory for every student

Analog Inputs:

• Used in the Oscilloscope, Network Analyzer, Spectrum Analyzer, Voltmeter, Impedance Analyzer, and Data Logger
• Two analog input channels, accessible through BNC or MTE connectors
• Channel type: differential (with MTE) or single-ended (with BNC)
• Analog bandwidth with BNC cables: 30+ MHz @ 3dB
• Analog bandwidth with MTE flywires: 9 MHz @ 3dB
• Input range ±25 V (±50 V diff)
• Input protected to ±50 V
• 14-bit resolution
• Operate at 100 MS/s

Power Supplies:

• 12 volt supply: 12V ±5%; 0.2 Amps max
• -12 volt supply: -12V ±5%, 0.2 Amps max
• 5 volt supply: 5.0V ±5%; 1.0 Amps max
• 3.3 volt supply: 3.3V ±5%; 1.0 Amps max
• V+ and V- rails: 1V to 5V (V+), and -1V to -5V (V-)
  • Maximum power output: 2.1W for each supply
  • Maximum current output: 700mA for each supply.
• Note: Remove the protective foam from underneath the Breadboard Canvas before using the power supplies

 Analog Outputs:

• Used in the Waveform Generator and Network Analyzer
• Two arbitrary waveform generator channels, accessible through BNC or MTE connectors
• AC amplitude (max): ±5 V
• Analog bandwidth (BNC or MTE connectors: 8 MHz @ 3dB)
• Operate at 100 MS/s

Product Compliance:

• HTC: 8471809000
• ECCN: EAR99

Digital Inputs and Outputs:

• Used in the Logic Analyzer, Pattern Generator, Protocol Analyzer, and Digital I/O
• Channels: 16
• Input logic standard: LVCMOS (1.8/3.3V, 5V tolerant)
• Output logic standard: LVCMOS (3.3V, 12mA)